Consulting +49 40 42946-800
info@condor-rohrsystem.de
Kurzrohr SL / VWR
CONDOR short tubes type S / VWR
FROM FULL-WALL TUBETHE OPTIMUM AND ECONOMICAL SOLUTION FOR THE RENOVATION OF PRINTED COLLECTORS IN THE LINING PROCESS
The Condor short pipe type SL / VWR is a flush pluggable short pipe for the renovation in the large pipe area with little loss of cross section to the old pipe.
When renovating collectors in the range of DN 700 to DN 1000 with extruded PE solid wall pipes in accordance with DIN 8074/75, the grading of the standardized outside diameter is so unfavorable that the contracting authorities are often forced to use other refurbishment methods due to the hydraulic requirements Cross-section loss is too large.
The PE 100 solid wall winding tubes according to DIN 16961 and EN 13476 solve this problem. They have an optimal gradation to the existing old pipe diameters (DN), so that only a small cross-sectional loss has to be considered. A significant advantage is that the wall thicknesses can be adapted to the requirements of the existing installation conditions individually, ie the solid wall winding tube can be used not only for Lining-, but also for Berstliningeinsätze.
Upon request, Condor also supplies the modules in electroweldable type CONDORfuse.
Technical specifications:
Pipe material / color:
- PE 100 according to DIN 16961 and EN 13476 outside black, inside light,
- inspection-friendly or black
Short tube lengths (L2):
- 1.0 m,
- 1.20 m,
- 1.50 m,
- 2,0 m and
- 3.0 m lengths
Pipe connection type SL:
- inside and outside flush restrained push-in socket
- Insertion depth: 100 mm
Sealing system:
Two SBR wedge seals according to DIN 4060 and DIN EN 681-1 integrated in the spigot end of the socket joint, quality controlled; Test pressure 0.5 bar; When pushing the plug-in sleeve, lubricants should be used to prevent dryness and thus possible twisting of the seal.
Mounting system:
The tube modules are always delivered with an external groove on the pointed and socket end. The tube modules are pulled together either with the hydraulic CONDOR puller type Quick-Lock, a hydraulic chain hoist (recommended type Spannfix) or a hydraulic push cylinder with stopper plate.
DOWNLOADS
,